Technical Articles
HCM Brasil: Solução para novo cálculo do INSS
(Scroll down for the English version, which is proudly presented by the SAP Leonardo machine translation service.)
Olá, pessoal,
Em Janeiro desse ano, publicamos o blog post “HCM Brasil eSocial: mudanças no cálculo do INSS e alerta para solução da BRISS”. Neste post, falamos sobre as alterações no cálculo do INSS e sobre as primeiras notas dessa solução. No post de hoje vamos relembrar alguns pontos importantes para a instalação das notas, e a conclusão da entrega da solução.
Instalação das notas do novo cálculo do INSS
Para a instalação correta das notas do INSS, os pontos abaixo devem ser observados:
- A solução da BRISS entregue pela nota “2377336 – BRISS – Source code enhancement” (de 2016) deve estar ativa no sistema.The new version of the BRISS source code is activate with the value ‘1,00’ in the constant BRISS of the V_T511K table view. This note delivers the constant with value equals to ‘1,00’ which means that the new version of the BRISS is activated.
- O Sistema deve estar atualizado com, no mínimo, o support package liberado a partir de 9 de novembro de 2017.Mais informações nos posts:HCM Brasil eSocial: [RETIFICAÇÃO] pré-requisitos de Support Package para implementação de SAP NotesHCM Brazil eSocial: new Support Package prerequisites as of November + roadmap information moved to SAP Support Portal
- As notas devem ser aplicadas respeitando a ordem descrita na nota de overview “2878329 – New Social Security Calculation (INSS) – Overview”
SAP Notes
Para a entrega das mudanças no cálculo de contribuição do INSS, adotamos a mesma estratégia utilizada no eSocial. Criamos uma nota de overview e a solução foi entregue em etapas.
Hoje, com a publicação da nota “2885343 – New Social Security Calculation (INSS) – Changes in payroll functions”, concluímos a entrega da solução do novo INSS.
Nota de overview:
2878329 – New Social Security Calculation (INSS) – Overview
Lista de notas do novo cálculo de INSS:
- 2878939 – Prerequisite objects for SAP Note 2877539
- 2877539 – New Social Security Calculation (INSS) – Alert regarding old BRISS solution
- 2884865 – New Social Security Calculation (INSS) – Object for SAP Note 2883429 (Only for 608 release)
- 2883429 – Prerequesite objects for SAP Note 2879518
- 2879518 – New Social Security Calculation (INSS) – Technical preparation
- 2884757 – Prerequisite objects for SAP Note 2882265
- 2882265 – New Social Security Calculation (INSS) – Progressive and single range methods
- 2888223 – Prerequisite objects for SAP Note 2885343
- 2885343 – New Social Security Calculation (INSS) – Changes in payroll functions
IMPORTANTE:
- A data publicada pelo governo para a vigência do novo cálculo de INSS é 1º de Março de 2020.
- Observe os pré-requisitos e a ordem de implementação das notas
- Teste todos os cenários antes de mover as alterações para ambiente produtivo.
Gostou desse post? Dê um Like e compartilhe o conteúdo com seus colegas.
Fiquem à vontade para deixar um feedback, comentário ou pergunta no espaço abaixo. E não esqueçam de seguir a tag HCM Payroll Brazil na SAP Community para ficarem ligados nas últimas notícias sobre o eSocial.
Um abraço,
Aline Silveira
—-
Hi everyone,
In January this year, we published the blog post “HCM Brasil eSocial: mudanças no cálculo do INSS e alerta para solução da BRISS”. In this post, we talk about the changes in the calculation of the SIB (INSS) and the first notes for this solution. In today’s post, let’s discuss some important points of the note’s installation and the conclusion of the solution delivery.
Installation of New SIB (INSS) calculation notes
For the correct installation of the SIB notes, the following points must be observed:
- BRISS solution delivered by note “2377336 – BRISS – Source code enhancement” (2016) must be active in the system.The new version of the BRISS source code is activate with the value ‘1.00’ in the constant BRISS of the V_T511K table view. This note delivers the constant with value equals to ‘1.00’ which means the new version of the BRISS is activated.
- The System must be updated to at least the support package released as of November 9, 2017.
More information on the posts:HCM Brasil eSocial: [RETIFICAÇÃO] pré-requisitos de Support Package para implementação de SAP NotesHCM Brazil eSocial: new Support Package prerequisites as of November + roadmap information moved to SAP Support Portal - The notes must be applied respecting the order described in the overview note “2878329 – New Social Security Calculation (INSS) – Overview”
SAP Notes
In order to deliver the changes to the SIB contribution calculation, we adopted the same strategy used for the eSocial delivery. We have created an overview note and the solution has been delivered in pieces.
Today, with the release of note “2885343 – New Social Security Calculation (SIB) – Changes in payroll functions”, we conclude the delivery of the solution of the new SIB calculation.
Overview note:
2878329 – New Social Security Calculation (INSS) – Overview
List of notes for the new SIB calculation:
- 2878939 – Prerequisite objects for SAP Note 2877539
- 2877539 – New Social Security Calculation (INSS) – Alert regarding old BRISS solution
- 2884865 – New Social Security Calculation (INSS) – Object for SAP Note 2883429 (Only for 608 release)
- 2883429 – Prerequesite objects for SAP Note 2879518
- 2879518 – New Social Security Calculation (INSS) – Technical preparation
- 2884757 – Prerequisite objects for SAP Note 2882265
- 2882265 – New Social Security Calculation (INSS) – Progressive and single range methods
- 2888223 – Prerequisite objects for SAP Note 288534
- 2885343 – New Social Security Calculation (INSS) – Changes in payroll functions
IMPORTANT:
- As published by the government, the new SIB (INSS) calculation comes into effect in March 1st 2020.
- Be aware of the pre-requisites and the implementation sequence of the notes
- Test all scenarios before moving changes to a productive environment.
Did you like this post? Give us a like and share the content with your colleagues.
Please feel comfortable to leave feedback, comment, or question in the space below. And do not forget the HCM Payroll Brazil tag in SAP Community to be linked to the latest news on the eSocial.
All the best,
Aline Silveira
Boa tarde Aline,
qual a orientação da SAp com relação a tabela T7BRIS? Somente incluir mais uma faixa de percentual?
obrigada
Bom dia Lilian,
A tabela completa de INSS está publicada no link externo da PORTARIA Nº 3.659, DE 10 DE FEVEREIRO DE 2020.
http://www.in.gov.br/en/web/dou/-/portaria-n-3.659-de-10-de-fevereiro-de-2020-242573505
No sistema SAP a tabela T7BRIS é do tipo C: C Tab.customizing, atualização só por cliente, s/import.SAP. A atualização das faixas é de responsabilidade dos clientes.
Caso você ainda tenha dúvidas sobre esse tema, por favor, crie um incidente no product support sobre isso.
Atenciosamente,
Aline
Oi Aline boa Tarde
Aonde é configurado o valor deduzido no novo calculo do INSS? Não encontrei esse campo na tabela de parametrização de faixa de inss.
Atc.
Bom dia Daniel,
O cálculo de INSS é similar ao do IR, mas não há dedução na tabela. Os valores são calculados internamente no código. Você pode verificar a tabela oficial no site do governo.
Att,
Aline
Oi Aline Bom Dia
Implementei todas as notas e não esta calculando com a dedução. A SAP mandou ver a caracteristica 37INS.
Já configurei a mesma de duas formas mas o calculo não é feito internamente com a dedução. Tem ideia do que pode ser?
37INS Inidicar método de cálculo do INSS
EMPID Vínculo empregatício
01 Empregado
X
e fiz VAZIO tb no lugar do X.
Obrigado
Oi Daniel,
Faça um teste com a configuração abaixo na feature.
37INS Inidicar método de cálculo do INSS
EMPID Vínculo empregatício
outros
<branco>
Com o valor 1 o sistema verifica se o campo EMPID do IT0016 do empregado tem valor 1, se sim ele vai usar o cálculo antigo.
É importante ressaltar que a feature 37INS somente deve ser configurada para os tipos de vinculo que devem permanecer no cálculo antigo. Se você não tem nenhum empregado nesse cenário, não precisa configurar a feature.
Caso tenha dúvidas adicionais, por favor, crie um incidente.
Att,
Aline
Aline Boa Tarde
Estou usando a feature 37INS para o calculo do inss para fazer similar ao do IR. A mesma está funcionado perfeitamente para funcionário do tipo empregado no infotipo 16. Mas para pro tipo estatutário não esta fazendo o calculo similar do IR com isso o teto no INSS para estatutário está errado.
Minha configuração atual:
37INS Inidicar método de cálculo do INSS
EMPID Vínculo empregatício
outros
VAZIO
Tem ideia o que seria?Pode me ajudar por favor?
Atc.
Boa tarde Daniel,
Nesse caso precisamos verificar os dados no seu sistema. Com a configuração acima na feature o sistema deve utilizar o novo cálculo de INSS para todos os códigos de EMPID Vínculo empregatício no IT0016.
Sugiro que você crie um incidente para que possamos analizar os dados no seu sistema.
Att,
Aline
Oi Aline
Obrigado pela resposta. Abri chamado de 214940 / 2020 . Se conseguir dar um help lá para ajudar agradeço.
Atc.
Aline Boa Tarde
Funcionou muito obrigado.
Abraço