Skip to Content

This blog is created with joint team work between Hanuma Rupakala and Mahesh Sardesai.

WARNING: for Best practices activation purpose, In case you are using SapGui version 7.50, you need to deactivate the SAP Fiori visual theme on the Blue Crystal Theme visual design  option or select any other theme in the SAP GUI options. Currently MM01 ECATT fails with the default theme (will be fixed shortly). Once the Best practices activation is completed, you can activate the SAP Fiori visual theme back. This is shown later under SAPGUI settings.

This blog includes installation of S/4HANA 1709 FPS2 and will focus on creating Sandbox type instance with co-deployed (embedded) gateway.

Please refer other blogs as follows:

NEW INSTALLATION PART 1
Maint Planner   
PART 2
Installation     
PART 3
BP Activation US
PART 3A
BP Activation DE
S/4HANA 1709 FPS2            link link link link
S/4HANA 1709 FPS1            link link link link
S/4HANA 1709 FPS0            link link link link
S/4HANA 1610 FPS2            link link link link
S/4HANA 1610 FPS1            link link
S/4HANA 1610 FPS0            link link link link
S/4HANA 1511 FPS2            link
S/4HANA 1511 FPS1            link

 

SYSTEM CONVERSION PART 1
Maint Planner   
PART 2
Pre-Checks    
PART 3
Custom Code Migratio
S/4HANA 1610 FPS0 link link link

The step by step procedure for Best Practices Content Activation on S/4HANA 1709 FPS2 has only two base languages EN & DE and Country= Germany. The BP Activation process runtime is 7Hrs. Please refer Admin Guide.

Adding further language translations later is not supported once the solution is activated, therefore, identify and install all the required languages you may need in future (if possible). You can check the following blog post for information on how to import a large number of languages efficiently.

In the 1709 release, the Solution builder automatically identifies your installed languages and imports only those translations required while importing the installation data.

A new Solution Builder profile has been created with ALL scope items but in case you have finalised scope items you can select only the needed scope items. Depending on how many selected scope items, activation procedure will need less time The status of system before starting this procedure is clearly defined before starting.

STEP1: S/4HANA 1709 FPS2 is installed and SPAM checked as per blog Part 2.

STEP2: All Notes are applied after complete installation of S/4HANA 1709 FPS2 is installed as per SAP Note 2621258 – SAP S/4HANA 1709 Feature Package Stack 02: Additional Release Information 

In addition please review note 2622532 – SAP S/4HANA, on-premise edition 1709 – SAP S/4HANA ON-PREMISE 1709 FP stack 02 (05/2018) content activation note

STEP3: Using SFW5, Enterprise Business Functions are activated as per list

FIN_FSCM_CLM
FIN_FSCM_BNK
FIN_REP_SIMPL_2
FIN_REP_SIMPL_3
FIN_REP_SIMPL_4
FIN_LOC_SRF
LOG_EAM_SIMPLICITY
LOG_EAM_SIMPLICITY_2
LOG_EAM_SIMPLICITY_3
LOG_EAM_SIMPLICITY_4
LOG_EAM_SIMPLICITY_5
LOG_EAM_SIMPLICITY_6
STEP4: Client Copy has been completed with tables defines in whitelist table /FTI/TWHITEL01 by registering client in table /FTI/T_NOCLN000 and using copy profile SAP_UCUSSAP_CUSTSAP_CUSV or SAP_UCSV as per the Admin Guide. Copied client to have no currency in tCode SCC4.

STEP5: Review Note 2622532 – SAP S/4HANA, on-premise edition 1709 – SAP S/4HANA ON-PREMISE 1709 FP stack 02 (05/2018) content activation note

Download zip file from URL below to desktop and then upload to server. https://service.sap.com/~sapdownload/012002523100000046092018E/S4HoP1709SP02SolDtaF180524.zip
Extract zip file, copy file K907721.QEX to directory /usr/sap/trans/cofiles and R907721.QEX to directory /usr/sap/trans/data and change file permissions to 755 with with user sidadm e.g. chmod 755 s4aadm:sapsys

Add transport requests to buffer QEXK907721 with steps below tCode STMS, Import Overview,

After the transport is in buffer, select the  transport and import, In the Options tab checkmark Ignore Invalid component version
STEP6: Create users for content activation as per admin guide with details:

STEP7: Change SAP Profile parameters as below and restart SAP:
abap/heap_area_dia = 6442450944
sapgui/user_scripting = TRUE

SAPGUI SETTINGS: for Best practices activation purpose, In case you are using SapGui version 7.50, you need to deactivate the SAP Fiori visual theme on the Blue Crystal Theme visual design option or select any other theme in the SAP GUI options. Currently MM01 ECATT fails with the default theme (will be fixed shortly). Once the Best practices activation is completed, you can activate the SAP Fiori visual theme back.

STEP8: Import solutions from SAP Best Practices content. Enter tCode /N/SMB/BBI. Choose menu Solution -> Import -> Solution (XML) -> From reference content
Select Solution Builder Content ID BP_OP_ENTPR_S4HANA1709_DEV4.XML from below

After import is complete log will be displayedClick on icon Back

STEP9: Import Installation Data. Choose Menu Solution -> Import -> Installation Data -> From reference content and Select solution INST_FILES_DE_BP_S4BL_S4HANA1709_OP.ZIP

Click on column “Changed On” 2 times to change sort order and select line below:

TIP: IMPORT TAKES 3 MINUTES
You should get message below at the end of import

STEP10: Enter tCode /N/SMB/BBI -> Building Block Builder (snapshots shown for US)Select (1) the solution, (2) Find 22T , (3) select DE_22T_OP, select DE_22R_OP and back to DE_22T_OP so that 3rd window is refreshed, (4) Find BJZ (XX) (5) select BJZ (XX), Click on (6) Building Block Library (7) enter value 2DI and click on (8) Find, (9) Select 2DI, (10) Click Display<–>Change , Drag and drop 2DI on BJZ (XX) so that it appears after BJZ (XX) and above 1YK

STEP11: Defining the scope of your solution. Copy Solution BP_OP_ENTPR_S4HANA1709_DEV4 to  Z_MY_SOLUTION_DE
Please Copy with installation data and Exit
TIP:COPY TAKES 3 MINUTES
Define scope of your solution if needed by clicking on Change icon.


Click OK. Click on Favorite to make this solution as your favorite 

TIP: As of release 1709, SAP Best Practices Solution Builder automatically identifies your installed languages and imports only the relevant translations required during the import of installation data

STEP12: enter tCode SCC4 and ensure below values – Logical SystemS4HCLNT100 (needed for EWM steps as per 3.4.1.2 of Admin Guide as per doc in link), Currency – blank, Client role – Test.

STEP 13(OPTIONAL): Best Practices content activation for any solution will populate the client currency as USD by default. In case you want to have a different client currency, you should change the currency before activation starts.You should not change client currency once the first solution in the client is activated. The procedure is as follows:
Enter tCode /N/SMB/BBI -> Building Block Builder, Menu Installation Data -> Central Data

select DSC – /SMB99/STD_CURR_DSC_J01 Click on Maintain and change field I_MWAER to EUR

STEP 14: Please do all the steps needed for Pre-activation settings for EWM scope items as per Admin Guide 3.4.1.2 as per the Admin Guide in the link summarized here
STEP 15: Review List of Activation Errors as below. Depending on scope items you have selected, you may get less errors. This is the summary of errors described later The list is provided as a quick search. The timings are based on Cloud based Virtual Machine with  256GB RAM x 32 Cores.

STEP16: Enter tCode /n/SMB/BBI and go to Solution Builder. Select the Solution and click on Implementation Assistant and Click on button Activate.
After 2 minutes you will be prompted with screen below.
You can select Skip this screen if you don’t want this screen from popping up everytime.
If a message pops up “To activate the project, the client settings need to be changed to eCATT and CATT allowed” this would come up if you didn’t follow the step 14 for SCC4, please choose Yes.

STEP 17(OPTIONAL): Using file below as timing is same as FPS1 S4HANA_1709FPS1_BPContentActivationTimeTracker.XSLX provided in link, you can track
(a) the time of activation completion as well as
(b) time at which next error will occur

The steps are:
1. Enter Start time in green cell on last row E711 for USA, E702 for Germany
2. Track the time in Column E against Activity Step in Column A
3. If time in col E is different from current form current time update it in format HH:MM:SS

STEP18: FIRST ERROR

Building Block 2BA (DE)
Affected Activity SIMG_CFMENUORFBOB40
Activity Description Define Tax Accounts

You will get Activation Error as shown below:

No steps to be done here, just click on activate to continue as below:

STEP19: SECOND ERROR

Building Block BR1 (XX)_OP
Affected Activity /SMB99/CL20N_PO_O001_J01
Activity Description Define Release Procedure for Purchase Order

You will get Activation Error as shown below:

No steps to be done here, just click on activate to continue as below:

STEP20: THIRD ERROR

Building Block 2D8 (XX)
Affected Activity /SMB99/SM30_PPH_BF_PRFL_V_O001
Activity Description Create Buffer Profile

You will get Activation Error as shown below:

No steps to be done here,, Click on Change Button and confirm the step with text below.

STEP21: COMPLETION OF ACTIVATION At the end of activation you should get message “Solution ZEXP_BP_OP_ENTPR_S4H activated”. CONGRATULATIONS !!!!
Please revert the parameter for abap/heap_area_dia and adjust SAPGUI scripting as well as remove SAP_ALL authorization from functional users if granted separately.

You can help us improve the time estimate. Please send the downloaded log file to mahesh.sardesai@sap.com This file contains the only  the information about activation objects and timing. Steps are as below. Please state S4H release, Which languages like DE, EN and Which country like USA, Gremany, etc.
tCode SECATT, click on icon – Logs, change to activation user and dates as needed, Max No of Hits = blank. Export to local file, In the Clipboard, paste into notepad txt file and send the text file.

STEP22: POST ACTIVATION – EXECUTING MANUAL REWORK ACTIVITIES:
Please follow procedure as described in Admin Guide section 3.5 Executing manual rework activities. Also detailed steps in the guide in link.
Access tCode /n/SMB/BBI, select the solution you activated and set it to favorite. In the menu bar choose Solution -> Procedure -> Start a procedure. In the Execute a Solution Processing Procedure dialog box choose procedure Manual Rework Required and choose OK.

STEP23: SYSTEM LANDSCAPE MANAGEMENT FOR QAS AND PROD:
Recommendation is not to do Content Activation of best practices in QAS and PROD. You have to move the transports as below in graphic.

  1. SAP Best Practices client is set-up with specific client copy profile
  2. SAP Best Practices customizing after initial activation
  3. Manual extension of business configuration using IMG
  4. Additional client 000 customizing for customer adaptation (Note 2272406)

This blog is created with joint team work between Hanuma Rupakala and Mahesh Sardesai.

Hanuma Rupakala
Package Build Lead – USA (hanumachastry.rupakula@sap.com)

and

Mahesh Sardesai
Product Expert – S4HANA

To report this post you need to login first.

Be the first to leave a comment

You must be Logged on to comment or reply to a post.

Leave a Reply